Pylox Spray Paint


SGD $10.80


METHOD:
Spray
THEORETICAL COVERAGE:
Wood surface – 0.4 – 1.0 m2 / 400cc (3 passes per coat)
Metal surface – 0.8 – 1.6 m2 / 400cc (3 passes per coat)
DRYING TIME:
Hard Dry – 30 minutes at 30°C
SPRAY APPLICATION:
– Shake container vigorously for at least 30 seconds before use
– Hold can approximately 30 cm from the surface to be sprayed on
– While spraying, keep can in horizontal motion so that coating is deposited evenly. Do not permit paint to build up
– Spray several thin coats, instead of one heavy coat, and allow each coat to cure for at least 10 minutes
– For Fluorescent range, if the surface is not white-based, a coat of Pylox White is recommended to bring out the fluorescent effect.
Steel
The surface must be clean and dry, free from grease and oil prior to the application. Sand to improve adhesion
Light Metal and Alloys
Chemical treatment is necessary prior to the application. Sand to improve adhesion