PN532 NFC RFID Module v3 Kit

SKU: PN532-NFC-V3-KIT

SGD $9.00

Availability: 7

PN532 not found - General Guidance - Arduino Forum

 

The PN532 is a highly integrated transmission module for contactless communication at 13.56 MHz including microcontroller functionality based on an 80C51 core with 40 Kbytes of ROM and 1 Kbytes of RAM. The PN532 combines a modulation and demodulation concept completely integrated for different kinds of contactless communication methods and protocols at 13.56 MHz with an easy-to-use firmware for the different supported modes and the required host controller interfaces.

It works as an RFID reader/writer,1443-A card, or a virtual card and also supports NFC with Android phones. It is also compatible with Arduino.

 

Features:

  • Support II2, SPI, and HSU (High-Speed UART)
  • I2C / UART: 3.3V ~ 24V TTL
  • SPI: 3.3V TTL with 100-ohm resistors in series
  • Communication distance: 5cm~7cm
  • On-board level shifter, Standard 5V TTL for I2C and UART, 3.3V TTL SPI
  • Work in NFC Mode or RFID reader/writer Mode
  • RFID reader/writer supports:
  • Plug and play, compatible
  • Built-in PCB Antenna, with 4cm~6cm communication distance
  • On-board level shifter, Standard 5V TTL for I2C and UART, 3.3V TTL SPI
  • Work as an RFID reader/writer
  • Work as a 1443-A card or a virtual card
  • Exchange data with other NFC devices such as a smartphone

Parts Includes:

1 x PN532 NFC RFID v3 Module

1 x MIFARE Classic Dongle

1 x MIFARE Classic Card

1 x 4-pin RIght Angled Male Header Pin

1 x 8-pin RIght Angled Male Header Pin

4 x 20cm Female to Female Jumper Wire

 

Tutorial:

https://osoyoo.com/2017/07/19/pn532-nfc-rfid-module-for-arduino/