Simplifying Robotics with Raspberry PiĀ® RP2040
Cytron Maker Pi RP2040 features the first microcontroller designed by Raspberry Pi – RP2040, embedded onĀ a robot controller board. This boardĀ comes with dual channelĀ DC motor driver, 4 servo motor ports and 7 Grove I/O connectors, ready for your next DIY robot / motion controlĀ project. Now you can buildĀ robot, while trying out the new RP2040 chip.
Ā NoteĀ Ā For International Makers, please check out ourĀ our partners here.

The DC motor driver onboard is able to control 2x brushed DC motors or 1xĀ bipolar/unipolar stepper motor rated from 3.6V to 6V, providing up to 1A current per channel continuously. The built-in Quick Test buttons and motor output LEDs allow functional test of the motor driver in a quick and convenient way, without the need of writing any code. Vmotor for both DC and servo motors depends on the input voltage supplied to the board.


Credit: 3D robot parts designed byĀ Camilo Parra PalacioĀ fromĀ OttoDIY Community.

Credit:Ā Self-watering PlanterĀ 3DĀ parts on Thingiverse.

Maker Pi RP2040Ā features all the goodness of Cytron’s Maker series products. It too hasĀ lots of LEDs useful for troubleshooting (& visual effects), is able to make quite some noise with the onboard piezo buzzer and comes with push buttons ready to detect your touch.

There are three ways to supply power to the Maker Pi RP2040 –Ā via USB (5V) socket, with a single cell LiPo/Li-Ion battery or through the VIN (3.6-6V) terminals. However only one power source is needed to power up both controller board and motors at a time.Ā Power supply from all these power sources can all be controlled with the power on/off switch onboard.


Cytron Maker Pi RP2040 is basically theĀ Raspberry Pi PicoĀ + Maker series’ goodness + Robot controller & other useful features. Therefore this board isĀ compatible with the existing Pico ecosystem. Software, firmware, libraries and resources that areĀ developed for Pico should workĀ seamlessly with Cytron Maker Pi RP2040 too.
CircuitPython is preloaded on the Maker Pi RP2040 and it runs a simple demo program right out-of-the-box. ConnectĀ it to your computer via USB micro cable and turn it on, you will be greeted by a melody tune and LEDs running light. PressĀ GP20 and GP21 push buttons to toggleĀ the LEDs on/off, while controlling any DC and servo motors connected to it to move and stop.Ā With this demo code, you get to test the board the moment you receive it!
While connected to your computer,Ā a new CIRCUITPY drive appears. Explore and edit the demo code (code.py & lib folder) with any code editor you like, save any changes to the driveĀ and you shall see it in action in no time. That’s why we embraceĀ CircuitPythonĀ –Ā it’s very easy to get started. Wish to use other programming lauguages?Ā Sure, you are free to useĀ MicroPythonĀ andĀ C/C++Ā for Pico/RP2040. For those of you who loves the Arduino ecosystem, please take a look at thisĀ official newsĀ by Arduino and also theĀ unofficial Pico Arduino CoreĀ by Earle F. Philhower.

Be Part of Our Growing Raspberry Pi Education Community!



