1000:1 Micro Metal Gearmotor HP 6V

SKU: 1595
MANUFACTURER: Pololu

SGD $75.00

Availability: 2

 

1000:1 Micro Metal Gearmotor.

 

Gearmotor details:

motor/brush type gearbox encoder
HP 6V: high-power 6V with precious metal brushes 986.41:1 with brass plates no encoder

Key specifications:

voltage no-load performance stall extrapolation*
6 V 31 RPM, 100 mA 12 kgâ‹…cm (166 ozâ‹…in), 1.6 A
* Note: Stall torque and stall current specifications are theoretical values; stalls could damage the motor or gearbox.

Exact gear ratio: 25×34×35×34×34×34×2712×9×12×14×14×14×9≈986.41:1

Motor Accessories

 

Pololu Wheel 32×7mm on a Micro Metal Gearmotor.
Black Pololu Wheel 70×8mm on a Pololu Micro Metal Gearmotor.
A pair of Pololu universal aluminum mounting hubs for 3 mm diameter shafts.
12mm Hex Wheel Adapter for 3mm Shaft on a Micro Metal Gearmotor.

 

 

Black micro metal gearmotor mounting bracket pair with included screws and nuts.
White micro metal gearmotor mounting bracket pair with included screws and nuts.
Pololu micro metal gearmotor bracket extended with Micro Metal Gearmotor.

 

  • Encoders and connector boards: While we have versions of our Micro Metal Gearmotors available with encoders already installed, we also have encoder boards available separately that can be installed on the Micro Metal Gearmotor versions with extended motor shafts. For the single-shaft versions, we have 2-pin connector boards available that work with 2-pin JST SH-style female cables.

 

Side-by-side comparison of Magnetic Encoder with Top-Entry Connector (left), Side-Entry Connector (center), and 2mm-pitch through-holes (right).
Micro Metal Gearmotor with Back-Entry, 2-Pin JST SH-Style Connector Board and cable (cable not included).
Micro Metal Gearmotor with Side-Entry, 2-Pin JST SH-Style Connector Board and cable (cable not include).

 

 

MP6550 Single Brushed DC Motor Driver Carrier.
Motoron M1T550/M1U550 Single Motor Controller (Header Pins Soldered).
Motoron M2T550/M2U550 Dual Motor Controller (Header Pins Soldered).
Three Motoron M3S550 shields being controlled by an Arduino Uno.

 

  • Current sensors: The recommended motor control options above have built-in current sensing, but we also have an assortment of stand-alone Hall effect-based current sensors to choose from:

 

ACS724LLCTR-2P5AB Current Sensor Carrier -2.5A to +2.5A.

 

We also incorporate these motors into some of our products, including our Zumo robot and 3pi robot :

 

Assembled Zumo 2040 robot.
3pi+ 2040 Robot.