SHOP NOW
PRODUCTS
Linear Encoder 900mm
MODEL: ENC4113_0
SGD $ 249.00
Pre-Order
In Bulk
(per piece)
(per piece)
This 900mm linear encoder has a quadrature output with index channel and is ideal for use in linear systems.
This linear encoder converts movement along it's 900mm of travel into a quadrature signal that is readable by any of our encoder interfaces. It has an index channel that triggers in several places along the length of the encoder to aid in startup calibration.
Connection
By default this encoder ships with a DB9 connector that has the following pinout:
Pin | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
---|---|---|---|---|---|---|---|---|---|
Signal | NC | Gnd | NC | Shield | NC | A | Vcc | B | Index |
Color | Black | Shielding | Yellow | Red | Green | Brown |
In order to connect this device to a Phidgets encoder board, you'll need to remove the DB9 connector and solder on the included 5-pin encoder cable. See the Connection & Compatibility tab for more details.
Comes Packaged with:
- Phidget encoder cable with heat-shrink tubes
- Debris shielding
- Two mounting plates
- Washers (2x large, 4x medium, 6x small)
- M5 Screws (2x 40mm, 2x 30mm, 4x 20mm)
- M4 Screws (4x 20mm, 5x 12mm)
- 4x Metal mounting shim
- 3x Plastic cable clip
Product Specifications
Encoder Properties | |
---|---|
Length Resolution | 5 μm/cyc |
Electrical Properties | |
Supply Voltage Min | 5 V DC |
Supply Voltage Max | 5 V DC |
Physical Properties | |
Travel | 900 mm |
IP Rating | IP55 |
Maximum Speed | 1 m/s |
Customs Information | |
Canadian HS Export Code | 9029.10.00 |
American HTS Import Code | 9029.10.80.00 |
Country of Origin | CN (China) |