FREE DELIVERY FOR ORDERS ABOVE $100 ALL AROUND SINGAPORE!
PRODUCTS
Draw Wire Encoder (1.5m)
MODEL: ENC4107_0
(per piece)
Like a digital tape measure, this 1500mm draw wire encoder measures the length of wire pulled out of it.
In complex mechanical systems, it is often very difficult to accurately measure the movement of a single part, particularly if it has several degrees of freedom. The draw wire encoder is a versatile solution to this very problem; it can be attached to a part using an M5 screw or fastened to the end with a zip tie, and the encoder itself has a pair of M5 screw threads on the back for easy installation.
When the wire is pulled out, the sensor produces a quadrature signal to describe the length of wire exposed. The reel is spring loaded, so it will retract when there is no tension in the wire. Multiple draw wire sensors could be used to track the position in more than one dimension.
Product Specifications
| Encoder Properties | |
|---|---|
| Manufacturer Part Number | RLC50D-1500-D1F-1M |
| Output Circuit Type | Push-Pull |
| Length Resolution | 100 μm/cyc |
| Wire Pull Length | 1.5 m |
| Electrical Properties | |
| Supply Voltage Max | 5 V DC |
| Current Consumption Max | 60 mA |
| Physical Properties | |
| Wire Load Maximum | 255 g |
| Wire Pull Speed Max | 1 m/s |
| Weight | 485 g |
| Operating Temperature Min | -30 °C |
| Operating Temperature Max | 90 °C |
| Screw Thread Size | M5 |
| IP Rating | IP54 |
| Customs Information | |
| Canadian HS Export Code | 9029.10.00 |
| American HTS Import Code | 9029.10.80.00 |
| Country of Origin | CN (China) |