Layer-7.png
SHOP NOW

PRODUCTS

Draw Wire Encoder (0.6m)

Draw Wire Encoder (0.6m)

MODEL: ENC4106_0

SGD $ 306.00
Pre-Order
In Bulk
(per piece)

ENC4106 Functional

Like a digital tape measure, this 600mm draw wire encoder measures the length of wire pulled out of it.

 

In complex mechanical systems, it is often very difficult to accurately measure the movement of a single part, particularly if it has several degrees of freedom. The draw wire encoder is a versatile solution to this very problem; it can be attached to a part using an M5 screw or fastened to the end with a zip tie, and the encoder itself has a pair of M4 screw threads on the back for easy installation.

FUNCTIONAL

When the wire is pulled out, the sensor produces a quadrature signal to describe the length of wire exposed. The reel is spring loaded, so it will retract when there is no tension in the wire. Multiple draw wire sensors could be used to track the position in more than one dimension.

Product Specifications

Encoder Properties
Manufacturer Part Number RLC40D-600-D1F-1M
Output Circuit Type Push-Pull
Length Resolution 100 μm/cyc
Wire Pull Length 600 mm
Electrical Properties
Supply Voltage Max 5 V DC
Current Consumption Max 60 mA
Physical Properties
Wire Load Maximum 255 g
Wire Pull Speed Max 1 m/s
Weight 255 g
Operating Temperature Min -30 °C
Operating Temperature Max 90 °C
Screw Thread Size M4
IP Rating IP54
Customs Information
Canadian HS Export Code 9029.10.00
American HTS Import Code 9029.10.80.00
Country of Origin CN (China)

Documents