Accurately control one bipolar stepper motor with this controller. This board comes with a number of safety features.

Note: The 1067_0B is identical to the 1067_0, except that you have the option of whether you want to include the USB cable.

The 1067 – PhidgetStepper Bipolar HC allows you to control the position, velocity, and acceleration of one bipolar stepper motor. This is the product you want to use to control larger industrial steppers or for applications that need a lot of torque.

The 1067 can also be used in applications that require very precise positioning. It uses micro-stepping at all times to ensure smooth acceleration.

This board is USB isolated, protecting your system from ground loops, and comes with a built-in replacable ATP Blade Terminal fuse to protect against an over-current scenario.

Comes Packaged with

• A 5 Amp ATP Blade Terminal fuse
• Hardware mounting kit:
• 4x M3 Bolts (2cm Length)
• 4x Plastic spacers (5mm Length)
• 4x M3 Nuts

Warning

Make sure the power supply is unplugged before attaching or removing wires from the terminal blocks. Failure to do so could cause permanent damage to the PhidgetStepper board. When using larger motors with heavy loads or high speeds, you should take caution because the back EMF generated when stalling or changing directions could damage the motor controller. As a rule of thumb, if the kinetic energy of your application exceeds 10 joules, you are at risk of damaging the controller. Feel free to contact us for advice for such applications.

Product Specifications

Documents

• Stepper Motor and Controller Primer
• Motor Selection Guide
• Mechanical Drawings
• Download 3D Step File