SHOP NOW
PRODUCTS
4A Stepper Phidget
MODEL: STC1003_1
SGD $ 75.00
Pre-Order
In Bulk
(per piece)
(per piece)
This compact Stepper Phidget gives you control of one bipolar stepper motor from a port on your VINT hub.
The STC1003 allows you to control a bipolar stepper motor (up to 4A). This Phidget connects to your computer through a VINT Hub.
Features:
- Control position, velocity, and acceleration
- Current Control - Set the current limit and holding current separately
- Two Drive Modes - Step mode specifies a target position in 1/16th steps. Run mode rotates continuously at a specified velocity.
- Monitor Supply Voltage - Great for troubleshooting power issues and managing battery-powered applications.
Technical Details:
- Isolation - The VINT hub and the computer will be protected if anything goes wrong with your circuit
- Polarity Protection - The device will not turn on and will not be damaged if the power supply is connected backward
- Overcurrent Protection - Onboard fuse to protect the controller in an over-current event
- Overheating Protection - A built-in heatsink prevents overheating
- Failsafe Protection - Set the device to turn off if automatically your program becomes unresponsive
- Power Saving - Separate control over the current limit and the holding current limit
Product Specifications
Board Properties | |
---|---|
Controlled By | VINT |
Controller Properties | |
Motor Type | Bipolar Stepper |
Number of Motor Ports | 1 |
Motor Position Resolution | 1/16 Step (40-Bit Signed) |
Position Max | ± 1E+15 1/16 steps |
Stepper Velocity Resolution | 1 1/16 steps/sec |
Stepper Velocity Max | 115000 1/16 steps/sec |
Stepper Acceleration Resolution | 1 1/16 steps/sec² |
Stepper Acceleration Min | 2 1/16 steps/sec² |
Stepper Acceleration Max | 1E+07 1/16 steps/sec² |
Sampling Interval Min | 100 ms/sample |
Sampling Interval Max | 60 s/sample |
Electrical Properties | |
Available Current per Coil Max | 4 A |
Supply Voltage Min | 10 V DC |
Supply Voltage Max | 30 V DC |
Current Consumption Min (VINT Port) | 500 μA |
Current Consumption Max (VINT Port) | 1 mA |
Quiescent Power Consumption Max | 200 mW |
Replacement Fuse | 5A Slow Blow Blade Type, Regular or Micro |
Physical Properties | |
Recommended Wire Size | 16 - 26 AWG |
Operating Temperature Min | -20 °C |
Operating Temperature Max | 85 °C |
Customs Information | |
Canadian HS Export Code | 8471.80.00 |
American HTS Import Code | 8471.80.40.00 |
Country of Origin | CN (China) |