PRODUCTS
Brushless DC Motor Phidget
MODEL: DCC1100_0
(per piece)
Control a brushless DC motor from your VINT Hub. The hall effect input enables easy position and velocity control.
The DCC1100 requires an 8-30V DC power supply and can control one brushless DC motor. The motor must have hall-effect feedback for this controller to function. The DCC1100 has a 5-pin Molex connector to interface with the motor's hall-effect output. This Phidget connects to your computer through a VINT Hub.
Features:
- Control motor velocity, acceleration, and braking strength - Forward and reverse
- Set a specific target position
- Monitor Temperature - Your program can react to changes in controller temperature.
Technical Details:
- Isolation - The VINT port on this device is isolated, improving reliability and eliminating ground loops
- Overcurrent Protection - Onboard fuse to protect the controller in an over-current event
- Overheating Protection - A built-in heatsink prevents overheating
- Failsafe Protection - Set the device to turn off automatically if your program becomes unresponsive
Product Specifications
Board Properties | |
---|---|
Controlled By | VINT |
Electrical Properties | |
Supply Voltage Min | 8 V DC |
Supply Voltage Max | 30 V DC |
Current Consumption (Unconfigured) | (VINT Port) 500 μA |
Current Consumption Max | (VINT Port) 650 μA |
Replacement Fuse | 20A Slow Blow Blade Type, Standard or Micro |
Continuous Motor Current Max | 20 A |
Controller Properties | |
Motor Type | Brushless DC |
Number of Motor Ports | 1 |
Velocity Resolution | 0.003 Duty Cycle |
Hall-Effect Sensor | |
Hall-Effect Voltage | 5 V DC |
Physical Properties | |
Operating Temperature Min | -40 °C |
Operating Temperature Max | 85 °C |
Customs Information | |
Canadian HS Export Code | 8471.80.00 |
American HTS Import Code | 8471.80.40.00 |
Country of Origin | CN (China) |
Hall-Effect Input
3019 Cable | Motor Wire |
---|---|
Black | Ground |
Green | Hall-Effect 'C' |
White | Hall-Effect 'B' |
Red | +5V |
Brown | Hall-Effect 'A' |
To make connection simple, the DCC1100 has a 5-pin molex connector to interface with the motor's hall-effect output. All BLDC motors sold at Phidgets have the mating connector soldered to the end of the cable. If you have your own motor, you can cut a Phidget Encoder cable in half and solder them together as follows: