Layer-7.png
SHOP NOW

PRODUCTS

4A DC Motor Phidget

4A DC Motor Phidget

MODEL: DCC1002_0

SGD $ 75.00
Pre-Order
In Bulk
(per piece)

DCC1002 scaleDCC1002 InsideNote: All additional hardware sold separately

Control a single DC motor up to 4A with this compact and affordable Phidget. Connects to a VINT port.

 

The DCC1002 gives you complete control of one brushed DC motor with a current rating of up to 4 amps. It offers a compact enclosed form making it easy to fit into smaller projects. This Phidget connects to your computer through a VINT Hub.

Features:

  • Control motor velocity, acceleration, and braking strength - Forward and reverse
  • Set a specific target position (requires an encoder)
  • Encoder input - Read in the quadrature signal from an encoder attached to the shaft of your motor. This lets you make a closed-loop position controller.

Technical Details:

  • Isolation - The VINT port on this device is isolated, improving reliability and eliminating ground loops
  • Polarity Protection - The device will not turn on and will not be damaged if the power supply is connected backward
  • Overcurrent Protection - On-board fuse to protect the controller in an over-current event
  • Overheating Protection - A built-in heatsink prevents overheating
  • Failsafe Protection - Set the device to turn off automatically if your program becomes unresponsive

Product Specifications

Board Properties
Controlled By VINT
Controller Properties
Motor Type DC Motor
Number of Motor Ports 1
Acceleration Min 0.1 % Duty Cycle/s
Acceleration Max 100 % Duty Cycle/s
PWM Frequency 25 kHz
Sampling Interval Min 100 ms/sample
Sampling Interval Max 60 s/sample
Acceleration Resolution 0.1 Duty Cycle/s
Velocity Resolution 0.001 Duty Cycle
Current Limit Resolution 5.6 mA
Acceleration Time Min 20 ms
Acceleration Time Max 20 s
Electrical Properties
Continuous Motor Current Max 4 A
Supply Voltage Min 8 V DC
Supply Voltage Max 30 V DC
Current Consumption (Unconfigured) (VINT Port) 500 μA
Current Consumption Max (VINT Port) 2 mA
Power Consumption (Unconfigured) 288 mW
Power Consumption motor power plus 700 mW
Replacement Fuse 5A Slow Blow Blade Type, Standard or Micro
Encoder Interface
Number of Encoder Inputs 1
Encoder Interface Resolution x4
Count Rate Max 400000 pulses/s
Sampling Interval Min 50 ms/sample
Sampling Interval Max 60 s/sample
Encoder Input Low Voltage Max 2.4 V DC
Encoder Input High Voltage Min 2.6 V DC
Time Resolution 1 μs
Physical Properties
Recommended Wire Size 16 - 26 AWG
Operating Temperature Min -40 °C
Operating Temperature Max 85 °C
Customs Information
Canadian HS Export Code 8471.80.00
American HTS Import Code 8471.80.40.00
Country of Origin CN (China)

Documents