Grove – Multichannel Gas sensor is an environment detecting sensor with a built-in MiCS-6814 which can detect many unhealthy gases. 3 gases can be measured simultaneously due to its three channels, so it can help you to monitor the concentration of more than one gas.
This sensor belongs to the Grove system, and you can plug it onto the Base shield and work with Arduino directly without any jumper wires. The interface is I2C, so plug it onto the I2C port of Base shield, then you can start to work on it.
||89mm x140mm x6.8mm
|Max Heating Power
|Grove – Multichannel Gas Sensor
|26AWG Grove Cable
Three fully independent sensing elements on one package
Built with ATmega168PA
I2C interface with programmable address
Heating power can be shut down for low power
Detectable gases: Carbon monoxide (CO), Nitrogen dioxide (NO2), Hydrogen (H2), Ammonia (NH3), Methane (CH4), etc.
LEARN AND DOCUMENTS
This ML powered device smell diesel and send realtime notification on mobile. Using
Wio terminal, Edge Impulse & Blynk.
Our mission with nature is to preserve it, designing and implementing technologies
and monitoring methods with the help of IoT via Helium.
Grove – Multichannel Gas sensor is a environment detecting sensor with a built in
MiCS-6814 which can detect many unhealthful gases, and three gases can be
measured simultaneously due to its multi channels, so it can help you to monitor the
Decrease fire losses by identifying fire class and agent using machine learning applied
on the drone collected environmental data from fumes
Provide continuous info about room temperature, humidity, CO2 and luminoscity
levels and turn on leds at the end of the work to relax eyes
This project shows grove gas sensor V2 and Grove - AMG8833 8x8 Infrared Thermal Temperature of seeed studio integrated with arduino mkr1010.