FREE DELIVERY FOR ORDERS ABOVE $100 ALL AROUND SINGAPORE!
SHOP NOW
PRODUCTS
Serial Enabled 20x4 LCD - Black on Green 5V
MODEL: AE-SF-LCD-09568
SGD $ 72.00
Out Of Stock
In Bulk
(per piece)
(per piece)
| Serial Enabled 20x4 LCD - Black on Green 5V
This is the latest evolution of our serial LCD. Included on a single board is a 20x4 LCD and an embedded circuit based around a PIC 16F88. The on-board PIC takes a TTL serial input and prints the characters it receives onto the LCD. The installed firmware also allows for a number of special commands so you can clear the screen, adjust the backlight brightness, turn the display on/off, and more.
Communication with SerLCD requires 5V TTL serial at a default baud rate of 9600bps (8-N-1). You can adjust the baud to any standard rate between 2400 and 38400bps. The power (VDD), ground (GND) and RX pins are all broken out to both a 0.1" pitch header as well as a 3-pin JST connector.
SerLCD has the ability to dim the backlight to conserve power if needed. There is also a potentiometer on the back of the display to adjust the contrast.
|
|
| Features | |
|
+ Embedded PIC 16F88 utilizes onboard UART for greater communication accuracy
+ 20x4 Black on Green LCD
+ Adjustable baud rates of 2400, 4800, 9600 (default), 14400, 19200 and 38400
+ Operational Backspace
+ Greater processing speed at 10MHz
+ Incoming buffer stores up to 80 characters
+ Backlight transistor can handle up to 1A
+ Pulse width modulation of backlight allows direct control of backlight brightness and current consumption
+ All surface mount design allows a backpack that is half the size of the original
+ Faster boot-up time
+ Boot-up display can be turned on/off via firmware
+ User definable splash screen |