PRODUCTS
Grove - Thermal Imaging Camera / IR Array MLX90640 110 degree
MODEL: 114020142
(per piece)
Grove - Thermal Imaging Camera / IR Array MLX90640 110 degree
Key Features
- IR Thermal Sensor Array 32X24(MLX90640)
- 110°x75° FOV(field of view)
- Temperature measurement range:-40℃~300℃
- I2C Grove interface
Description
Looking for a thermal sensor that can detect your surround temperature? This IR thermal camera can not only measure the value of temperature around you but also display the thermal imaging figure. So it must be your best choice to monitor the temperature change from this tiny camera.
The IR thermal camera carries a 32x24 array of thermal sensors (MLX90640), it can detect the temperature of objects from feet away with the accuracy of ±1.5℃. In order to obtain the thermal image easily, the I2C protocol is used to get the low-resolution image from the camera. The FOV(Field of View) of this camera is 110°x75°, and the temperature measurement range is -40℃~300℃.
This module connects the MCU with the I2C interface. However, it needs an MCU that has over 20000 bytes of RAM to drive the camera. As a matter of fact, Dev board like Arduino Uno can not be used with this Sensor camera due to its lower ability of calculation. We recommend you to choose Arch Mix as an MCU to control the camera because it really has a good performance to process the complex data from the IR sensor camera.
Note
This thermal imaging sensor is also compatible with many Arduino boards and Seeeduino boards which are assembled with SAMD21/SAMD51 like Seeeduino Lotus Cortex - M0. And it also supports all series of Raspberry Pi including Raspberry Pi Zero.
Considering your convenience of using this camera, we have figured out all the libraries like Arduino Library and Python commend in our wiki page, so you can run up this IR camera module easily for just a few minutes.
Specification
Items | Grove - Thermal Imaging Camera - MLX90640 | Grove - Thermal Imaging Camera - MLX90641 |
---|---|---|
Thermal sensor | 32X24 array MLX90640 | 16x12 array MLX90641 |
Operating Voltage | 3V-3.6V | 3.3V - 5V |
Current Consumption | ~18mA | ~18mA |
Field of View | 110°x 75° | 110°x 75° |
Measurement Range | -40°C-300°C | -40°C-300°C |
Resolution | ±1.5°C | ±1.5°C(±1°C at centre area) |
Refresh Rate | 0.5Hz-64Hz | 0.5Hz-64Hz |
Interface | I2C Grove interface | I2C Grove interface |
I2C Address | 0x33 | 0x33 |
Part List
- 1*Grove - Thermal Imaging Camera / IR Array MLX90640 110 degree
Note
This product has a Grove interface that needs Grove Cable to connect with.