0
FREE DELIVERY FOR ORDERS ABOVE $100 ALL AROUND SINGAPORE!
Layer-7.png
SHOP NOW

PRODUCTS

RED 7.5inch E-Paper E-Ink Display HAT (B) For Raspberry Pi, 800×480

RED 7.5inch E-Paper E-Ink Display HAT (B) For Raspberry Pi, 800×480

MODEL: SKU: 13505

Add to Wishlist
Compare Now
SGD $ 95.00
1 To 2 Weeks
In Bulk
(per piece)
7.5" E-PAPER HAT (B)

Low Power Consumption, Wide Viewing Angle, Paper-Like Displaying Without Electricity

Ideal for price tags, shelf labels, industrial instruments...

 
  • Size7.5"
  • Resolution800×480
  • Viewing Angle>170°
  • Display ColorRed / Black / White
  • Grey Scale2
  • CommunicationSPI
  • Display PanelE-paper
  • ExperiencePaper-like
  • EnvironmentAmbient Light Required
  • Display TypePassively Reflective
Specifications:
OPERATING VOLTAGE 3.3V/5V

 

DISPLAY COLOR

 red, black, white
INTERFACE 3-wire SPI, 4-wire SPI GREY SCALE 2
OUTLINE DIMENSIONS 170.2 × 111.2mm FULL REFRESH TIME 16s
DISPLAY SIZE 163.2 × 97.92mm REFRESH POWER 48mW (typ.)
DOT PITCH 0.205 × 0.204mm STANDBY CURRENT <0.01uA (almost none)
RESOLUTION 800 × 480 pixels VIEWING ANGLE >170°
Advantages Of EINK

E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.

Standard Raspberry Pi 40PIN GPIO Header

Compatible With Raspberry Pi Series Boards, Jetson Nano

Raspberry Pi, Jetson Nano in the photo are NOT included.
Onboard SPI Control Interface

For Use With Other Controller Boards Like STM32/Arduino

VCC 3.3V/5V
GND Ground
DIN SPI MOSI pin
CLK SPI SCK pin
CS SPI chip selection, low active
DC Data / Command selection (high for data, low for command)
RST External reset, low active
BUSY Busy status output, high active

* for Arduino UNO, due to its RAM limit, it is better to choose the e-Paper Shield

Application Examples

Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...

Outline Dimensions
 
Resources & Services
 
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
  • SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc.
  • Onboard voltage translator, compatible with 3.3V / 5V MCUs
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)