Layer-7.png
SHOP NOW

PRODUCTS

PotContral 10Amp DC Motor Driver

PotContral 10Amp DC Motor Driver

MODEL: MD10-POT

SGD $ 18.22
10
In Bulk
(per piece)

10 Amp 7V-30V Potentiometer & Switch Control DC Motor Driver10 Amp 7V-30V Potentiometer & Switch Control DC Motor Driver10 Amp 7V-30V Potentiometer & Switch Control DC Motor Driver

MD10-POT is a motor driver or speed controller that enables you to easily control a motor's run/brake, direction and speed. No microcontroller is needed in a complete setup, hence programming is not required too.

Function

Description

Power Input Terminal

Connect to battery.

Motor Output Terminal

Connect to motor.

Power LED

Turn on when power up.

Motor Status LEDs

Turn on when the motor is running.

Test Buttons

Press to test the functionality of the motor / driver.

Speed Control Potentiometer

Connect to 10KΩ potentiometer for motor speed control.

Direction Switch

Connect to SPDT Switch for motor direction control.

PWM/DIR Input

Use this to control the motor with PWM signal.
DIR pin is used for direction control.

Refer to Table 2 below for truth table.

 

Table 1: MD10-POT Board Functions.

 

 

PWM

DIR

Output A (MA)

Output B (MB)

Motor

Low

X (Don’t Care)

Low

Low

Brake

High

Low

High

Low

Forward

High

High

Low

High

Reverse

 
  • Bidirectional control for one brushed DC motor.
  • Control motor run/brake and direction with a 3-way rocker switch (included in package).
  • Control motor rotation speed with a potentiometer (included in package).
  • Operating Voltage: DC 7V to 30V
  • Maximum Motor Current: 10A continuous, 30A peak
  • Buttons for quick testing.
  • LEDs for motor output state.
  • PWM and DIR inputs.
  • Compatible with sign-magnitude and locked-antiphase PWM operation.
  • Regenerative Braking.
  • No reverse polarity protection.
  • Dimension: 81.28mm x 48.26mm