PRODUCTS
Cisco 24-Port Unmanaged Rackmount Gigabit PoE Switch w/ 2 x 1GbE RJ45/SFP Combo Ports (100W) 110 Series
MODEL: CBS110-24PP
(per piece)
Cisco 24-Port Unmanaged Rackmount Gigabit PoE Switch
Cisco CBS110-24PP-UK Unmanaged PoE 24 Port Gigabit Switch
The Cisco CBS110-24PP 24-Port Unmanaged Rackmount Gigabit PoE Switch provides an easy-to-use solution for your small business network. This switch provides high-performance Gigabit Ethernet connectivity for your small business network. The CBS110-24PP is designed to suit any small business with basic network needs and is optimised for power efficiency. It provides robust network connectivity for your business's demands, as well as added reliability with advanced features such as Quality of Service (QoS), loop detection, and cable diagnostics, all in a switch that you can set up yourself in minutes. The Cisco CBS110-24PP brings the proven reliability and investment protection of Cisco networking solutions to your small business.
Key Features
- Twenty-four (24) 10/100/1000 RJ45 ports.
- Two (2) 1GbE RJ45/SFP combo ports.
- Twelve (12) PoE (802.3af) ports with a total budget of 100W.
- Supports the Energy Efficient Ethernet (IEEE 802.3az) standard.
- Integrated QoS intelligence.
- Fast store-and-forward switching.
- Plug-and-play solution.
- Fanless design for minimal noise.
Simple setup
The Cisco CBS110-24PP works right out of the box, with plug-and-play capability without software installation and configuration. Each switch port independently sets itself for the optimal speed and determines whether to run in half- or full-duplex mode automatically. As a standards-based Cisco solution, the CBS110-24PP is also designed to immediately accommodate all of the devices in your network.
Flexible deployment
Designed for small office spaces, the CBS110-24PP provides ultimate flexibility for diverse use cases and deployment scenarios. This rackmountable switch has no fans, so it runs silently and unobtrusively in any workspace.
High performance
This switch delivers the performance you need to run your business applications, including bandwidth-intensive cloud applications and video services. The CBS110-24PP supports Gigabit Ethernet speeds, unlocking a new level of capacity and performance in your business network and letting you transfer large files in seconds.
Reduced energy costs
The CBS110-24PP is designed to help conserve energy by optimising power use without compromising performance, which protects the environment and reduces your energy costs. In addition, it supports the Energy Efficient Ethernet (IEEE 802.3az) standard, which reduces energy consumption by monitoring the amount of traffic on an active link and putting the link into a sleep state during quiet periods.
Power over Ethernet (PoE)
The PoE capabilities of this switch simplify the deployment of IP telephony, wireless, video surveillance, and other IoT solutions by allowing you to connect and power network endpoints over a single Ethernet cable. With no need to install separate power supplies for IoT devices, you can take advantage of advanced communications technologies more quickly and at a lower cost.
Advanced technologies
This switch includes advanced Cisco traffic-handling features to keep your applications running at peak performance. Integrated QoS intelligence automatically prioritises delay-sensitive services such as voice or video to improve your network's performance. Loop detection helps discover loops in the network that you might have accidentally created, thus avoiding storms that will bring your network to a stall. Cable diagnostics help to quickly identify and troubleshoot network cabling faults and issues. Fast store-and-forward switching identifies damaged packets and prevents them from being passed on through the network. All of these features run automatically, with no management or configuration required.
Performance
Switching capacity and forwarding rate
Capacity in millions of packets per second (mpps) (64-byte packets)
- 35.7 mpps
Switching capacity in gigabits per second (Gbps)
- 48 Gbps
General
Head-of-line (HOL) blocking
- HOL blocking prevention
MAC table
- 8K addresses
Jumbo frame
- 9216 bytes
Quality of Service (QoS)
- 802.1p priority based, 4 hardware queues, priority queuing and Weighted Round-Robin (WRR)
Loop detection
- Helps discover loops in the network to avoid broadcast storms
Cable diagnostics
- Quickly identify and troubleshoot network cable faults and/or shorts
Media-dependent interface
- Automatic Media Dependent Interface (MDI) and MDI crossover (MDI-X)
Standards
- IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3z Gigabit Ethernet, IEEE 802.3x Flow Control, 802.1p priority, Energy Efficient Ethernet, 802.3af, Power over Ethernet
Hardware
Ports
Total system ports
- 24 x Gigabit Ethernet
RJ45 ports
- 24 x Gigabit Ethernet
Uplink ports (RJ45 + Small Form-factor Pluggable [SFP])
- 2 x SFP (combo with 2 Gigabit Ethernet)
Power over Ethernet (PoE) 802.3af
Power dedicated to PoE
- 100W
Number of ports that support PoE
- 12
Hardware
LEDs
- Power, link/activity (cable diagnostics, loop detection), Gigabit, PoE, Max PoE.
Cabling type
- Category 5e or better
Mounting options
- Desktop, wall-mount or rack mount
Physical security lock
- Kensington lock slot
Flash
- 8 MB
CPU
- 400 MHz ARM
CPU memory
- 64 MB
Packet buffer
- 2 Mbit
Environmental
Unit dimensions (W x D x H)
- 440 x 203 x 44 mm (17.32 x 7.97 x 1.73 in.)
Unit weight
- 2.98 kg (6.57 lb.)
Power
- 110-240VAC, 50-60 Hz, internal, universal
Power consumption (worst case)
System power consumption
- 110V=17.21W
- 220V=17.29W
Power consumption (with PoE)
- 110V=135.67W
- 220V=133.82W
Heat dissipation (BTU/hr)
- 462.93
Green (power efficiency)
- Supports IEEE 802.3az on all copper Gigabit Ethernet ports
Compliance/certifications
- UL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A, FCC Class B
Operating temperature
- 0ºC to 40ºC (32ºF to 104ºF)
Storage temperature
- -20ºC to 70ºC (-4ºF to 158ºF)
Operating humidity
- 10% to 90%, relative, noncondensing
Storage humidity
- 5% to 90%, relative, noncondensing
Fan (number)
- Fanless
Acoustic noise
- N/A
MTBF at 25ºC (hours)
- 340,703
Minimum requirements
- Devices supporting 802.3 Ethernet, 802.3u Fast Ethernet, or 802.3ab Gigabit Ethernet
- Cat5e or better Ethernet cable
- Network interface card for each computer
Package contents
- 1 x Cisco CBS110-24PP
- 1 x Power supply
- 1 x Quick start guide
- 1 x Mounting kit